Mod 3 night vision

The MOD-3 is a revolutionary new night vision system. Until now you could either have a binocular, or monocular. Using a bridge adapter to utilize two monoculars as a binocular has been done for years, but it has significant drawbacks.

The weight of such a unit is over grams, and they typically cannot be collimated. Many people enjoy using two monoculars when hunting. One on a neck lanyard for spotting, and one on their rifle. Yet most wish to avoid the cost of purchasing a binocular and two monoculars. The MOD-3 overcomes these problems by utilizing Optical Pods that are waterproof, Nitrogen purged units that can be installed into either a monocular or binocular.

Power is conducted to the intensifier tube and indicator LEDs by means of spring loaded, gold plated contacts. Even the springs are gold plated to prevent corrosion. A latching mechanism firmly holds the Optical Pods in place and is easily manipulated with one finger.

mod 3 night vision

Installing or removing the Optical Pods is accomplished in just a couple seconds. The Binocular Bridge has the features you expect to find on a night vision Binocular. It also includes a circuit that powers the tubes long after most systems would have shut down, using the 3V lithium battery down to a mere 0. This allows you a large emergency reserve after your low battery indicator flashes. The same style gold plated contacts that conduct power to the Optical Pods are also utilized in the Bridge assembly.

These conduct power from the Optical Pods to a circuit board and eliminates the need for wires in the joint which moves as you change IP adjustment. This prevents any problems with wires breaking and failing in this area.

The MOD-3 Binocular can be collimated and weighs in at grams. This adapts an Optical Pod into a full function monocular. It uses the 3V lithium battery as well. Like the Binocular Bridge, the Monocular Adapter releases the Optical pod with the press of one finger, allowing instant changeover from monocular to binocular.

The monocular housing is waterproof and has a side mount like a PVS, allowing you to use it as you would any other monocular with head and weapon mounts. The monocular is 75 grams lighter than a PVS IP Adjustment: 56mm 2.

Battery extender circuit powers tubes only down to 0. Water Resistance: Waterproof to 66ft. Warranty: 2 years on housing and electronics.The MOD-3 Bravo is a revolutionary night vision system. Until its release, you could either have a binocular or monocular. Using a bridge adapter to utilize two monoculars as a binocular has been done for years, but it has significant drawbacks. The weight of such a unit is over grams, and they typically cannot be collimated.

Many people enjoy using two monoculars when hunting. One on a neck lanyard for spotting, and one on their rifle. Yet most wish to avoid the cost of purchasing a binocular and two monoculars. The MOD-3 Bravo overcomes these problems by utilizing Optical Pods that are waterproof, Nitrogen purged units that can be installed into either a monocular or binocular.

Power is conducted to the intensifier tube and indicator LEDs by means of spring loaded, gold plated contacts. Even the springs are gold plated to prevent corrosion. A latching mechanism firmly holds the Optical Pods in place and is easily manipulated with one finger. Installing or removing the Optical Pods is accomplished in just a couple seconds.

The Binocular Bridge has the features you expect to find on a night vision Binocular. The same style gold plated contacts that conduct power to the Optical Pods are also utilized in the Bridge assembly. These conduct power from the Optical Pods to a circuit board and eliminates the need for wires in the joint which moves as you change IP adjustment. This prevents any problems with wires breaking and failing in this area.

This adapts an Optical Pod into a full function monocular. It uses the 3V lithium battery as well. Like the Binocular Bridge, the Monocular Adapter releases the Optical pod with the press of one finger, allowing instant changeover from monocular to binocular. The monocular housing is waterproof and has a side mount like a PVS, allowing you to use it as you would any other monocular with head and weapon mounts. The monocular is 75 grams lighter than a PVS The Bravo model is a product improvement over the legacy MOD3 in many ways.

The female dovetail adapters that accept the optic pods are now made out of aluminum rather than polymer. This increases strength exponentially and allows for adjustment screws to remove any play in between the pods and bridge.

Lanyard attachment points have been moved to the outer corners for easier access. The optic pod release levers have increased purchase surface for easier manipulation. The adapter sold separately simply screws in place of the dovetail. The MOD3 Bravo is one of the most innovative goggle systems on the market. The Binocular bridge will attach to any dovetail night vision mount interface while the monocular adapters simply require the addition of any PVS J-Arm to attach to a helmet mount.

The MOD3B system is available in different configurations. The standard version uses Automatic Brightness Control to automatically adjust the image brightness. It is also available with manual gain control — giving the user the ability to adjust the brightness. Next, the optics can be standard or C-Mount. C-Mount provides a quick-detach camera lens adapter interface.

It allows the user to remove the lenses and attach other lenses for use in other applications such as photography. They do not come with any provision for attaching to helmets, nor do they come with an objective lens assembly. The C-Mount is designed to interface with user-supplied camera or telescope lenses only.A latching mechanism holds the Optical Pods.

The MOD-3 is a revolutionary new night vision system. Until now, you could have either a binocular, or monocular.

Monoculars have more versatility and can be used handheld, mounted to a weapon, or head mount. However, everybody loves the image from a good binocular.

With them, you have depth perception and you do not have the eyestrain that comes from only using one eye with a monocular. Many people enjoy using two monoculars when hunting, one on a neck lanyard for spotting, and one mounted on a rifle. Nevertheless, with most of the cost of night vision being in the optics, even avid hunters are hesitant to purchase both a binocular system and two monoculars for their sport.

Spring-loaded gold plated contacts conduct power to the intensifier tube and indicator LEDs.

MOD-3 PRODUCT INFO

A latching mechanism firmly holds the Optical Pods in place and you can install or remove them in just a couple seconds. The Binocular Bridge has the features you expect to find on a night vision Binocular. The same style gold plated contacts that conduct power to the Optical Pods are in the Bridge assembly. These conduct power from the Optical Pods to a circuit board and eliminate the need for wires in the joint, which moves as you change IP adjustment.

Night Vision Monocular Gen 3 White Phosphor Level 1 PVS-14

This removes the potential for power failure due to wire breakage and The MOD-3 Binocular is collimateable. AB NightVision. Only logged in customers who have purchased this product may leave a review. Previous Product Next Product. IP Adjustment: 56mm 2.

Water Resistance: Waterproof to 66 ft. Warranty: 2 years on housing and electronics. Reviews There are no reviews yet.The MOD-3 is a revolutionary new night vision system. Until now you could either have a binocular, or monocular. Using a bridge adapter to utilize two monoculars as a binocular has been done for years, but it has significant drawbacks.

TNV/MOD3 Bravo Modular Goggle (AB Night Vision) – L3Harris (UF WP or TF GP)

The weight of such a unit is over grams, and they typically cannot be collimated. Many people enjoy using two monoculars when hunting. One on a neck lanyard for spotting, and one on their rifle. Yet most wish to avoid the cost of purchasing a binocular and two monoculars. The MOD-3 overcomes these problems by utilizing Optical Pods that are waterproof, Nitrogen purged units that can be installed into either a monocular or binocular.

Power is conducted to the intensifier tube and indicator LEDs by means of spring loaded, gold plated contacts. Even the springs are gold plated to prevent corrosion. A latching mechanism firmly holds the Optical Pods in place and is easily manipulated with one finger. Installing or removing the Optical Pods is accomplished in just a couple seconds. The Binocular Bridge has the features you expect to find on a night vision Binocular.

It also includes a circuit that powers the tubes long after most systems would have shut down, using the 3V lithium battery down to a mere 0. This allows you a large emergency reserve after your low battery indicator flashes. The same style gold plated contacts that conduct power to the Optical Pods are also utilized in the Bridge assembly. These conduct power from the Optical Pods to a circuit board and eliminates the need for wires in the joint which moves as you change IP adjustment.

This prevents any problems with wires breaking and failing in this area. The MOD-3 Binocular can be collimated and weighs in at grams. This adapts an Optical Pod into a full function monocular. It uses the 3V lithium battery as well. Like the Binocular Bridge, the Monocular Adapter releases the Optical pod with the press of one finger, allowing instant changeover from monocular to binocular.

The monocular housing is waterproof and has a side mount like a PVS, allowing you to use it as you would any other monocular with head and weapon mounts.

mod 3 night vision

The monocular is 75 grams lighter than a PVS IP Adjustment: 56mm 2. Battery extender circuit powers tubes only down to 0. Water Resistance: Waterproof to 66ft.

Warranty: 2 years on housing and electronics. Low Battery Indicator: Indicator flashes in the viewing plane at 2. Cart 0. Leave a comment Name Email.How do we protect visitor information? We implement a variety of security measures to maintain the safety of your personal information.

mod 3 night vision

Your personal information is contained behind secured networks and is only accessible by a limited number of persons who have special access rights to such systems, and are required to keep the information confidential.

When you place orders or access your personal information, we offer the use of a secure server. Do we use "cookies"? Cookies are small files that a site or its service provider transfers to your computer's hard drive through your Web browser if you allow that enables the site's or service provider's systems to recognize your browser and capture and remember certain information.

For instance, we use cookies to help us remember and process the items in your shopping cart. They are also used to help us understand your preferences based on previous or current site activity, which enables us to provide you with improved services. We also use cookies to help us compile aggregate data about site traffic and site interaction so that we can offer better site experiences and tools in the future. We may contract with third-party service providers to assist us in better understanding our site visitors.

These service providers are not permitted to use the information collected on our behalf except to help us conduct and improve our business. You can choose to have your computer warn you each time a cookie is being sent, or you can choose to turn off all cookies.

You do this through your browser like Netscape Navigator or Internet Explorer settings. Each browser is a little different, so look at your browser Help menu to learn the correct way to modify your cookies. If you turn cookies off, you won't have access to many features that make your site experience more efficient and some of our services will not function properly. However, you can still place orders over the telephone by contacting customer service. Do we disclose the information we collect to outside parties?

We do not sell, trade, or otherwise transfer to outside parties your personally identifiable information unless we provide you with advance notice, except as described below. The term "outside parties" does not include UNV. It also does not include website hosting partners and other parties who assist us in operating our website, conducting our business, or servicing you, so long as those parties agree to keep this information confidential.

We may also release your information when we believe release is appropriate to comply with the law, enforce our site policies, or protect ours or others' rights, property, or safety. However, non-personally identifiable visitor information may be provided to other parties for marketing, advertising, or other uses.

How can you opt-out, remove or modify information you have provided to us? To modify your e-mail subscriptions, please let us know by modifying your preferences in the "My Account" section. Please note that due to email production schedules you may receive any emails already in production.The MOD-3 is a revolutionary new night vision system.

Until now you could either have a binocular, or monocular. Using a bridge adapter to utilize two monoculars as a binocular has been done for years, but it has significant drawbacks. The weight of such a unit is over grams, and they typically cannot be collimated.

Many people enjoy using two monoculars when hunting. One on a neck lanyard for spotting, and one on their rifle. Yet most wish to avoid the cost of purchasing a binocular and two monoculars.

The MOD-3 overcomes these problems by utilizing Optical Pods that are waterproof, Nitrogen purged units that can be installed into either a monocular or binocular. Power is conducted to the intensifier tube and indicator LEDs by means of spring loaded, gold plated contacts. Even the springs are gold plated to prevent corrosion. A latching mechanism firmly holds the Optical Pods in place and is easily manipulated with one finger.

Installing or removing the Optical Pods is accomplished in just a couple seconds. The Binocular Bridge has the features you expect to find on a night vision Binocular.

It also includes a circuit that powers the tubes long after most systems would have shut down, using the 3V lithium battery down to a mere 0. This allows you a large emergency reserve after your low battery indicator flashes. The same style gold plated contacts that conduct power to the Optical Pods are also utilized in the Bridge assembly.

These conduct power from the Optical Pods to a circuit board and eliminates the need for wires in the joint which moves as you change IP adjustment. This prevents any problems with wires breaking and failing in this area.

The MOD-3 Binocular can be collimated and weighs in at grams. This adapts an Optical Pod into a full function monocular.The MOD-3 is a revolutionary new night vision system. Until now you could either have a binocular or monocular.

Using a bridge adapter to utilize two monoculars as a binocular has been done for years, but it has significant drawbacks. The weight of such a unit is over grams, and they typically cannot be collimated. Many people enjoy using two monoculars when hunting. One on a neck lanyard for spotting, and one on their rifle. Yet most wish to avoid the cost of purchasing a binocular and two monoculars. This unit features a Gen 2 MX tube which touts an incredible amount of clarity for a Gen 2 system.

MOD-3 Night Vision Monocular System Info

These tubes will meet the minimum spec, defined at the bottom of this page. These do NOT come with data sheets. The MOD-3 overcomes these problems by utilizing Optical Pods that are waterproof, Nitrogen purged units that can be installed into either a monocular or binocular.

Power is conducted to the intensifier tube and indicator LEDs by means of spring loaded, gold plated contacts. Even the springs are gold plated to prevent corrosion. A latching mechanism firmly holds the Optical Pods in place and is easily manipulated with one finger.

Installing or removing the Optical Pods is accomplished in just a couple seconds. The Binocular Bridge has the features you expect to find on a night vision Binocular. The same style gold plated contacts that conduct power to the Optical Pods are also utilized in the Bridge assembly.

These conduct power from the Optical Pods to a circuit board and eliminates the need for wires in the joint which moves as you change IP adjustment. This prevents any problems with wires breaking and failing in this area. The MOD-3 Binocular can be collimated and weighs in at grams.


thoughts on “Mod 3 night vision

Leave a Reply

Your email address will not be published. Required fields are marked *